April Tech Day 04/21/07

by **mistanfo** » April 13th, 2007, 2:44 pm

Looks like I will NOT be there, as I am now officially going to the EVO school in Danville, VA that day. Kinda far to run up afterwards...

by **mj71** » April 13th, 2007, 8:25 pm

Miatamadman wrote:Mike was the belt difficult to install? seems that is supposed to be the hardest part

Not that I recall. The whole process isn't really bad, just a whole lot to undo/redo.

by **Miatamadman** » April 15th, 2007, 1:21 pm

Well I think I will forgo the A/C PS ectomy, and just concentrate on the belt, and seals.

Anyone have a pvc pipe or something that can be used to install the front crank oil seal?

by **hoofhearted** » April 15th, 2007, 9:05 pm

I thought I should check in and see how many are gonna attend, looks like a good crowd. I saw some questions I can answer:
Show up whenever, after 8:30 am or so...give the wife a chance to get dressed. Timing belts and others big projects come early.
I will supply hot dogs and burgers and soda. Everybody should bring some kinda food and beer or alcohol of choice.
Yes, I still have the 96M, it's at the body shop being painted and I hope to have it back for Saturday. It will be FOR SALE after the paint job, :cry:

I don't have any projects planned for the car since I am not sure it will be back by then. But thanks for the consideration (Christian)!
See you all soon!
Ross
443-250-5394

by **bill_keksz** » April 16th, 2007, 3:30 am

I'll probably make it, but I've said that before....

by **Miatamadman** » April 16th, 2007, 7:08 am

Looking back I see so far, three roll bar installations (Christian! Roll Bar guru, are you working all day?) a shock/spring swap, a set of Stainless Steel brake hoses, a timing belt, and we are ripping the nose off an NC.... YES we have to put it back on! (with new fog light bezels)

Looks like a great time. I think I am going to hit some Heineken Light, unless there are massive objections...

by **mj71** » April 16th, 2007, 7:28 am

Miatamadman wrote:I think I am going to hit some Heineken Light, unless there are massive objections...

I'd guess the Heinekens are likely to object.

by **IH82BL8** » April 16th, 2007, 8:16 am

One of these tech days, I want to do a rollbar install, I just dont want to cut my panels...I cant cut a straight line for anything...

I trimmed mine with a scroll saw and am very pleased with the results. When the Tech Day comes to install your rollbar, I can bring the saw (and my car, so you can see the results).

This particular Tech Day is too far from my house.

by **Miatamadman** » April 16th, 2007, 11:59 am

mj71 wrote:
Miatamadman wrote:I think I am going to hit some Heineken Light, unless there are massive objections...

I'd guess the Heinekens are likely to object.

Yes, I tend to leave them feling empty inside...

Ahh that was refreshing, no?

by **wesgardner** » April 16th, 2007, 12:18 pm

Got room for any more attendees? I've got a front sway (and end links)that needs to be installed - I have no ramps...can anyone help?

I have a cheesy timing light if someone still needs it...

by **Miatamadman** » April 16th, 2007, 12:58 pm

Will you be joining our ranks as well that afternoon?

I think we should be able to accomodate! Stop by but dont forget to bring beer!

See ya there

by **SilverTanLS** » April 17th, 2007, 12:38 am

Change of plans, gotta work...wont get off til 12 or 1.

by **Miatamadman** » April 17th, 2007, 11:18 am

Does anyone else have a project that needs near the garage? I was thinking about stealing a spot near it (or in it if im lucky) since I will be there for quite some time.

by **travism** » April 17th, 2007, 11:33 am

I'll be coming in late because I've agreed to help one of my friends get to Annapolis so he can pick up a new STI. I'd still like to shoot for getting the roll bar installed but, I will probably save the ss brake lines for another day.

by **Miatamadman** » April 17th, 2007, 11:39 am

travism wrote:I'll be coming in late because I've agreed to help one of my friends get to Annapolis so he can pick up a new STI. I'd still like to shoot for getting the roll bar installed but, I will probably save the ss brake lines for another day.

Bring the lines anyway, if im lucky and my car comes apart easily, I can help you do the brake lines during my lunch/beer swearing break...haha

Bring brake fluid and a bleeder if you have one... if not I have my little one ill have with me.

by **mistanfo** » April 17th, 2007, 12:22 pm

Dave- Bring my bleeder with you. If anyone needs fluid, I can bring some to the meeting on Thursday. Someone there will be able to get it to the tech day.

by **Miatamadman** » April 17th, 2007, 12:23 pm

mistanfo wrote:Dave- Bring my bleeder with you. If anyone needs fluid, I can bring some to the meeting on Thursday. Someone there will be able to get it to the tech day.

You mean your gigantic one in a trash bag in my kitchen?

by **ChristianL** » April 17th, 2007, 10:09 pm

Miatamadman wrote:...(Christian! Roll Bar guru, are you working all day?) ...

Sadly, most likely. Though if you guys need my help, and it's after 5pm, someone run down the road and pick me up!

by **Miatamadman** » April 18th, 2007, 6:40 am

I will try to abuse my power and get you there.

by **wesgardner** » April 18th, 2007, 9:29 am

Unfortunately, I'm going to have to back out of tech day AND the autox on Sunday...dang

by **Miatamadman** » April 18th, 2007, 9:42 am

Sorry to hear that.

Come to the meeting instead. HAHA

by **ZoomZoomBrad** » April 18th, 2007, 10:26 am

Sorry, New "hobby" is getting in the way and I will be in "School"

Count my fingers next time you see me

PGI DISPLAY FIREWORKS OPERATOR CERTIFICATION CLASS

by **Miatamadman** » April 18th, 2007, 10:39 am

ZoomZoomBrad wrote:Sorry, New "hobby" is getting in the way and I will be in "School"

Count my fingers next time you see me

PGI DISPLAY FIREWORKS OPERATOR CERTIFICATION CLASS

You are crazy Brad... keep it up...

by **mistanfo** » April 18th, 2007, 10:50 am

Brad- once you've graduated, are you no longer allowed to aim roman candles at your friends and light them off?

by **ZoomZoomBrad** » April 18th, 2007, 11:40 am

I will be able to buy MUCH LARGER roman candles

by **bill_keksz** » April 18th, 2007, 11:48 am

But you'll no longer be able to claim plausible deniability.

by **ZoomZoomBrad** » April 18th, 2007, 12:27 pm

can too

by **uncompiled** » April 20th, 2007, 11:44 am

Looks like it would be a wonderful weekend to do work on the car. Unfortunately, I have plans for this Sunday... :oops:

by **Miatamadman** » April 20th, 2007, 1:13 pm

Change of plans

I will not be doing my timing belt... instead I will assist with some brake work, roll bars and other small projects.

I think instead I will just bleed my clutch on my 91.

So if you need help, I will be available. I also will be picking Christian up from his job so he can attend and help

Actually can I get some quick help in changing my fuel filter? Please?

by **thebeerbaron** » April 20th, 2007, 10:11 pm

Summary for sanity:

Arrive after 0830. Burgers/Dogs/Soda provided by Ross.

JMPitt820 - Roll Bar
FaeFlora - Roll Bar
Travism - Roll Bar, late arrival
Quiksilver - Hidden Hitch wiring
PSBJames - Front Bumper

I may have an exhaust to install. I will likely be a late-morning arrival so as I can pick up some exhaust-related stuff. I soaked the cat bolts two weekends ago when I did the alignment bolts, but we shall see... Does anyone have brasso or other polish appropriate for tarnished stainless tips?

Unless I hear otherwise, I will bring chips/pretzels sorts of snacks rather than my traditional donuts.

-updated & corrected-

April Tech Day 04/21/07

Party host

Who is online